1 files changed, 9 insertions, 75 deletions
diff --git a/nixpkgs/nixos/modules/installer/cd-dvd/sd-image-aarch64.nix b/nixpkgs/nixos/modules/installer/cd-dvd/sd-image-aarch64.nix
index e4ec2d6240d0..76c1509b8f7e 100644
--- a/nixpkgs/nixos/modules/installer/cd-dvd/sd-image-aarch64.nix
+++ b/nixpkgs/nixos/modules/installer/cd-dvd/sd-image-aarch64.nix
@@ -1,80 +1,14 @@
-# To build, use:
-# nix-build nixos -I nixos-config=nixos/modules/installer/cd-dvd/sd-image-aarch64.nix -A config.system.build.sdImage
-{ config, lib, pkgs, ... }:
-
+{ config, ... }:
 {
   imports = [
-    ../../profiles/base.nix
-    ../../profiles/installation-device.nix
-    ./sd-image.nix
+    ../sd-card/sd-image-aarch64-installer.nix
   ];
-
-  boot.loader.grub.enable = false;
-  boot.loader.generic-extlinux-compatible.enable = true;
-
-  boot.consoleLogLevel = lib.mkDefault 7;
-
-  # The serial ports listed here are:
-  # - ttyS0: for Tegra (Jetson TX1)
-  # - ttyAMA0: for QEMU's -machine virt
-  boot.kernelParams = ["console=ttyS0,115200n8" "console=ttyAMA0,115200n8" "console=tty0"];
-
-  boot.initrd.availableKernelModules = [
-    # Allows early (earlier) modesetting for the Raspberry Pi
-    "vc4" "bcm2835_dma" "i2c_bcm2835"
-    # Allows early (earlier) modesetting for Allwinner SoCs
-    "sun4i_drm" "sun8i_drm_hdmi" "sun8i_mixer"
-  ];
-
-  sdImage = {
-    populateFirmwareCommands = let
-      configTxt = pkgs.writeText "config.txt" ''
-        [pi3]
-        kernel=u-boot-rpi3.bin
-
-        [pi4]
-        kernel=u-boot-rpi4.bin
-        enable_gic=1
-        armstub=armstub8-gic.bin
-
-        # Otherwise the resolution will be weird in most cases, compared to
-        # what the pi3 firmware does by default.
-        disable_overscan=1
-
-        [all]
-        # Boot in 64-bit mode.
-        arm_64bit=1
-
-        # U-Boot needs this to work, regardless of whether UART is actually used or not.
-        # Look in arch/arm/mach-bcm283x/Kconfig in the U-Boot tree to see if this is still
-        # a requirement in the future.
-        enable_uart=1
-
-        # Prevent the firmware from smashing the framebuffer setup done by the mainline kernel
-        # when attempting to show low-voltage or overtemperature warnings.
-        avoid_warnings=1
-      '';
-      in ''
-        (cd ${pkgs.raspberrypifw}/share/raspberrypi/boot && cp bootcode.bin fixup*.dat start*.elf $NIX_BUILD_TOP/firmware/)
-
-        # Add the config
-        cp ${configTxt} firmware/config.txt
-
-        # Add pi3 specific files
-        cp ${pkgs.ubootRaspberryPi3_64bit}/u-boot.bin firmware/u-boot-rpi3.bin
-
-        # Add pi4 specific files
-        cp ${pkgs.ubootRaspberryPi4_64bit}/u-boot.bin firmware/u-boot-rpi4.bin
-        cp ${pkgs.raspberrypi-armstubs}/armstub8-gic.bin firmware/armstub8-gic.bin
-        cp ${pkgs.raspberrypifw}/share/raspberrypi/boot/bcm2711-rpi-4-b.dtb firmware/
-      '';
-    populateRootCommands = ''
-      mkdir -p ./files/boot
-      ${config.boot.loader.generic-extlinux-compatible.populateCmd} -c ${config.system.build.toplevel} -d ./files/boot
-    '';
+  config = {
+    warnings = [
+      ''
+      .../cd-dvd/sd-image-aarch64.nix is deprecated and will eventually be removed.
+      Please switch to .../sd-card/sd-image-aarch64-installer.nix, instead.
+      ''
+    ];
   };
-
-  # the installation media is also the installation target,
-  # so we don't want to provide the installation configuration.nix.
-  installer.cloneConfig = false;
 }