{ system ? builtins.currentSystem , config ? {} , pkgs ? import ../.. { inherit system config; } # bool: whether to use networkd in the tests , networkd }: with import ../lib/testing.nix { inherit system pkgs; }; with pkgs.lib; let router = { config, pkgs, ... }: with pkgs.lib; let vlanIfs = range 1 (length config.virtualisation.vlans); in { environment.systemPackages = [ pkgs.iptables ]; # to debug firewall rules virtualisation.vlans = [ 1 2 3 ]; boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = true; networking = { useDHCP = false; useNetworkd = networkd; firewall.checkReversePath = true; firewall.allowedUDPPorts = [ 547 ]; interfaces = mkOverride 0 (listToAttrs (flip map vlanIfs (n: nameValuePair "eth${toString n}" { ipv4.addresses = [ { address = "192.168.${toString n}.1"; prefixLength = 24; } ]; ipv6.addresses = [ { address = "fd00:1234:5678:${toString n}::1"; prefixLength = 64; } ]; }))); }; services.dhcpd4 = { enable = true; interfaces = map (n: "eth${toString n}") vlanIfs; extraConfig = '' authoritative; '' + flip concatMapStrings vlanIfs (n: '' subnet 192.168.${toString n}.0 netmask 255.255.255.0 { option routers 192.168.${toString n}.1; # XXX: technically it's _not guaranteed_ that IP addresses will be # issued from the first item in range onwards! We assume that in # our tests however. range 192.168.${toString n}.2 192.168.${toString n}.254; } ''); }; services.radvd = { enable = true; config = flip concatMapStrings vlanIfs (n: '' interface eth${toString n} { AdvSendAdvert on; AdvManagedFlag on; AdvOtherConfigFlag on; prefix fd00:1234:5678:${toString n}::/64 { AdvAutonomous off; }; }; ''); }; services.dhcpd6 = { enable = true; interfaces = map (n: "eth${toString n}") vlanIfs; extraConfig = '' authoritative; '' + flip concatMapStrings vlanIfs (n: '' subnet6 fd00:1234:5678:${toString n}::/64 { range6 fd00:1234:5678:${toString n}::2 fd00:1234:5678:${toString n}::2; } ''); }; }; testCases = { loopback = { name = "Loopback"; machine.networking.useNetworkd = networkd; testScript = '' startAll; $machine->waitForUnit("network.target"); $machine->succeed("ip addr show lo | grep -q 'inet 127.0.0.1/8 '"); $machine->succeed("ip addr show lo | grep -q 'inet6 ::1/128 '"); ''; }; static = { name = "Static"; nodes.router = router; nodes.client = { pkgs, ... }: with pkgs.lib; { virtualisation.vlans = [ 1 2 ]; networking = { useNetworkd = networkd; useDHCP = false; defaultGateway = "192.168.1.1"; interfaces.eth1.ipv4.addresses = mkOverride 0 [ { address = "192.168.1.2"; prefixLength = 24; } { address = "192.168.1.3"; prefixLength = 32; } { address = "192.168.1.10"; prefixLength = 32; } ]; interfaces.eth2.ipv4.addresses = mkOverride 0 [ { address = "192.168.2.2"; prefixLength = 24; } ]; }; }; testScript = { ... }: '' startAll; $client->waitForUnit("network.target"); $router->waitForUnit("network-online.target"); # Make sure dhcpcd is not started $client->fail("systemctl status dhcpcd.service"); # Test vlan 1 $client->waitUntilSucceeds("ping -c 1 192.168.1.1"); $client->waitUntilSucceeds("ping -c 1 192.168.1.2"); $client->waitUntilSucceeds("ping -c 1 192.168.1.3"); $client->waitUntilSucceeds("ping -c 1 192.168.1.10"); $router->waitUntilSucceeds("ping -c 1 192.168.1.1"); $router->waitUntilSucceeds("ping -c 1 192.168.1.2"); $router->waitUntilSucceeds("ping -c 1 192.168.1.3"); $router->waitUntilSucceeds("ping -c 1 192.168.1.10"); # Test vlan 2 $client->waitUntilSucceeds("ping -c 1 192.168.2.1"); $client->waitUntilSucceeds("ping -c 1 192.168.2.2"); $router->waitUntilSucceeds("ping -c 1 192.168.2.1"); $router->waitUntilSucceeds("ping -c 1 192.168.2.2"); # Test default gateway $router->waitUntilSucceeds("ping -c 1 192.168.3.1"); $client->waitUntilSucceeds("ping -c 1 192.168.3.1"); ''; }; dhcpSimple = { name = "SimpleDHCP"; nodes.router = router; nodes.client = { pkgs, ... }: with pkgs.lib; { virtualisation.vlans = [ 1 2 ]; networking = { useNetworkd = networkd; useDHCP = true; interfaces.eth1 = { ipv4.addresses = mkOverride 0 [ ]; ipv6.addresses = mkOverride 0 [ ]; }; interfaces.eth2 = { ipv4.addresses = mkOverride 0 [ ]; ipv6.addresses = mkOverride 0 [ ]; }; }; }; testScript = { ... }: '' startAll; $client->waitForUnit("network.target"); $router->waitForUnit("network-online.target"); # Wait until we have an ip address on each interface $client->waitUntilSucceeds("ip addr show dev eth1 | grep -q '192.168.1'"); $client->waitUntilSucceeds("ip addr show dev eth1 | grep -q 'fd00:1234:5678:1:'"); $client->waitUntilSucceeds("ip addr show dev eth2 | grep -q '192.168.2'"); $client->waitUntilSucceeds("ip addr show dev eth2 | grep -q 'fd00:1234:5678:2:'"); # Test vlan 1 $client->waitUntilSucceeds("ping -c 1 192.168.1.1"); $client->waitUntilSucceeds("ping -c 1 192.168.1.2"); $client->waitUntilSucceeds("ping -c 1 fd00:1234:5678:1::1"); $client->waitUntilSucceeds("ping -c 1 fd00:1234:5678:1::2"); $router->waitUntilSucceeds("ping -c 1 192.168.1.1"); $router->waitUntilSucceeds("ping -c 1 192.168.1.2"); $router->waitUntilSucceeds("ping -c 1 fd00:1234:5678:1::1"); $router->waitUntilSucceeds("ping -c 1 fd00:1234:5678:1::2"); # Test vlan 2 $client->waitUntilSucceeds("ping -c 1 192.168.2.1"); $client->waitUntilSucceeds("ping -c 1 192.168.2.2"); $client->waitUntilSucceeds("ping -c 1 fd00:1234:5678:2::1"); $client->waitUntilSucceeds("ping -c 1 fd00:1234:5678:2::2"); $router->waitUntilSucceeds("ping -c 1 192.168.2.1"); $router->waitUntilSucceeds("ping -c 1 192.168.2.2"); $router->waitUntilSucceeds("ping -c 1 fd00:1234:5678:2::1"); $router->waitUntilSucceeds("ping -c 1 fd00:1234:5678:2::2"); ''; }; dhcpOneIf = { name = "OneInterfaceDHCP"; nodes.router = router; nodes.client = { pkgs, ... }: with pkgs.lib; { virtualisation.vlans = [ 1 2 ]; networking = { useNetworkd = networkd; useDHCP = false; interfaces.eth1 = { ipv4.addresses = mkOverride 0 [ ]; useDHCP = true; }; interfaces.eth2.ipv4.addresses = mkOverride 0 [ ]; }; }; testScript = { ... }: '' startAll; # Wait for networking to come up $client->waitForUnit("network.target"); $router->waitForUnit("network.target"); # Wait until we have an ip address on each interface $client->waitUntilSucceeds("ip addr show dev eth1 | grep -q '192.168.1'"); # Test vlan 1 $client->waitUntilSucceeds("ping -c 1 192.168.1.1"); $client->waitUntilSucceeds("ping -c 1 192.168.1.2"); $router->waitUntilSucceeds("ping -c 1 192.168.1.1"); $router->waitUntilSucceeds("ping -c 1 192.168.1.2"); # Test vlan 2 $client->waitUntilSucceeds("ping -c 1 192.168.2.1"); $client->fail("ping -c 1 192.168.2.2"); $router->waitUntilSucceeds("ping -c 1 192.168.2.1"); $router->fail("ping -c 1 192.168.2.2"); ''; }; bond = let node = address: { pkgs, ... }: with pkgs.lib; { virtualisation.vlans = [ 1 2 ]; networking = { useNetworkd = networkd; useDHCP = false; bonds.bond = { interfaces = [ "eth1" "eth2" ]; driverOptions.mode = "balance-rr"; }; interfaces.eth1.ipv4.addresses = mkOverride 0 [ ]; interfaces.eth2.ipv4.addresses = mkOverride 0 [ ]; interfaces.bond.ipv4.addresses = mkOverride 0 [ { inherit address; prefixLength = 30; } ]; }; }; in { name = "Bond"; nodes.client1 = node "192.168.1.1"; nodes.client2 = node "192.168.1.2"; testScript = { ... }: '' startAll; # Wait for networking to come up $client1->waitForUnit("network.target"); $client2->waitForUnit("network.target"); # Test bonding $client1->waitUntilSucceeds("ping -c 2 192.168.1.1"); $client1->waitUntilSucceeds("ping -c 2 192.168.1.2"); $client2->waitUntilSucceeds("ping -c 2 192.168.1.1"); $client2->waitUntilSucceeds("ping -c 2 192.168.1.2"); ''; }; bridge = let node = { address, vlan }: { pkgs, ... }: with pkgs.lib; { virtualisation.vlans = [ vlan ]; networking = { useNetworkd = networkd; useDHCP = false; interfaces.eth1.ipv4.addresses = mkOverride 0 [ { inherit address; prefixLength = 24; } ]; }; }; in { name = "Bridge"; nodes.client1 = node { address = "192.168.1.2"; vlan = 1; }; nodes.client2 = node { address = "192.168.1.3"; vlan = 2; }; nodes.router = { pkgs, ... }: with pkgs.lib; { virtualisation.vlans = [ 1 2 ]; networking = { useNetworkd = networkd; useDHCP = false; bridges.bridge.interfaces = [ "eth1" "eth2" ]; interfaces.eth1.ipv4.addresses = mkOverride 0 [ ]; interfaces.eth2.ipv4.addresses = mkOverride 0 [ ]; interfaces.bridge.ipv4.addresses = mkOverride 0 [ { address = "192.168.1.1"; prefixLength = 24; } ]; }; }; testScript = { ... }: '' startAll; # Wait for networking to come up $client1->waitForUnit("network.target"); $client2->waitForUnit("network.target"); $router->waitForUnit("network.target"); # Test bridging $client1->waitUntilSucceeds("ping -c 1 192.168.1.1"); $client1->waitUntilSucceeds("ping -c 1 192.168.1.2"); $client1->waitUntilSucceeds("ping -c 1 192.168.1.3"); $client2->waitUntilSucceeds("ping -c 1 192.168.1.1"); $client2->waitUntilSucceeds("ping -c 1 192.168.1.2"); $client2->waitUntilSucceeds("ping -c 1 192.168.1.3"); $router->waitUntilSucceeds("ping -c 1 192.168.1.1"); $router->waitUntilSucceeds("ping -c 1 192.168.1.2"); $router->waitUntilSucceeds("ping -c 1 192.168.1.3"); ''; }; macvlan = { name = "MACVLAN"; nodes.router = router; nodes.client = { pkgs, ... }: with pkgs.lib; { environment.systemPackages = [ pkgs.iptables ]; # to debug firewall rules virtualisation.vlans = [ 1 ]; networking = { useNetworkd = networkd; firewall.logReversePathDrops = true; # to debug firewall rules # reverse path filtering rules for the macvlan interface seem # to be incorrect, causing the test to fail. Disable temporarily. firewall.checkReversePath = false; useDHCP = true; macvlans.macvlan.interface = "eth1"; interfaces.eth1.ipv4.addresses = mkOverride 0 [ ]; }; }; testScript = { ... }: '' startAll; # Wait for networking to come up $client->waitForUnit("network.target"); $router->waitForUnit("network.target"); # Wait until we have an ip address on each interface $client->waitUntilSucceeds("ip addr show dev eth1 | grep -q '192.168.1'"); $client->waitUntilSucceeds("ip addr show dev macvlan | grep -q '192.168.1'"); # Print lots of diagnostic information $router->log('**********************************************'); $router->succeed("ip addr >&2"); $router->succeed("ip route >&2"); $router->execute("iptables-save >&2"); $client->log('=============================================='); $client->succeed("ip addr >&2"); $client->succeed("ip route >&2"); $client->execute("iptables-save >&2"); $client->log('##############################################'); # Test macvlan creates routable ips $client->waitUntilSucceeds("ping -c 1 192.168.1.1"); $client->waitUntilSucceeds("ping -c 1 192.168.1.2"); $client->waitUntilSucceeds("ping -c 1 192.168.1.3"); $router->waitUntilSucceeds("ping -c 1 192.168.1.1"); $router->waitUntilSucceeds("ping -c 1 192.168.1.2"); $router->waitUntilSucceeds("ping -c 1 192.168.1.3"); ''; }; sit = let node = { address4, remote, address6 }: { pkgs, ... }: with pkgs.lib; { virtualisation.vlans = [ 1 ]; networking = { useNetworkd = networkd; firewall.enable = false; useDHCP = false; sits.sit = { inherit remote; local = address4; dev = "eth1"; }; interfaces.eth1.ipv4.addresses = mkOverride 0 [ { address = address4; prefixLength = 24; } ]; interfaces.sit.ipv6.addresses = mkOverride 0 [ { address = address6; prefixLength = 64; } ]; }; }; in { name = "Sit"; nodes.client1 = node { address4 = "192.168.1.1"; remote = "192.168.1.2"; address6 = "fc00::1"; }; nodes.client2 = node { address4 = "192.168.1.2"; remote = "192.168.1.1"; address6 = "fc00::2"; }; testScript = { ... }: '' startAll; # Wait for networking to be configured $client1->waitForUnit("network.target"); $client2->waitForUnit("network.target"); # Print diagnostic information $client1->succeed("ip addr >&2"); $client2->succeed("ip addr >&2"); # Test ipv6 $client1->waitUntilSucceeds("ping -c 1 fc00::1"); $client1->waitUntilSucceeds("ping -c 1 fc00::2"); $client2->waitUntilSucceeds("ping -c 1 fc00::1"); $client2->waitUntilSucceeds("ping -c 1 fc00::2"); ''; }; vlan = let node = address: { pkgs, ... }: with pkgs.lib; { #virtualisation.vlans = [ 1 ]; networking = { useNetworkd = networkd; useDHCP = false; vlans.vlan = { id = 1; interface = "eth0"; }; interfaces.eth0.ipv4.addresses = mkOverride 0 [ ]; interfaces.eth1.ipv4.addresses = mkOverride 0 [ ]; interfaces.vlan.ipv4.addresses = mkOverride 0 [ { inherit address; prefixLength = 24; } ]; }; }; in { name = "vlan"; nodes.client1 = node "192.168.1.1"; nodes.client2 = node "192.168.1.2"; testScript = { ... }: '' startAll; # Wait for networking to be configured $client1->waitForUnit("network.target"); $client2->waitForUnit("network.target"); # Test vlan is setup $client1->succeed("ip addr show dev vlan >&2"); $client2->succeed("ip addr show dev vlan >&2"); ''; }; virtual = { name = "Virtual"; machine = { networking.interfaces."tap0" = { ipv4.addresses = [ { address = "192.168.1.1"; prefixLength = 24; } ]; ipv6.addresses = [ { address = "2001:1470:fffd:2096::"; prefixLength = 64; } ]; virtual = true; }; networking.interfaces."tun0" = { ipv4.addresses = [ { address = "192.168.1.2"; prefixLength = 24; } ]; ipv6.addresses = [ { address = "2001:1470:fffd:2097::"; prefixLength = 64; } ]; virtual = true; }; }; testScript = '' my $targetList = <<'END'; tap0: tap persist user 0 tun0: tun persist user 0 END # Wait for networking to come up $machine->start; $machine->waitForUnit("network-online.target"); # Test interfaces set up my $list = $machine->succeed("ip tuntap list | sort"); "$list" eq "$targetList" or die( "The list of virtual interfaces does not match the expected one:\n", "Result:\n", "$list\n", "Expected:\n", "$targetList\n" ); # Test interfaces clean up $machine->succeed("systemctl stop network-addresses-tap0"); $machine->sleep(10); $machine->succeed("systemctl stop network-addresses-tun0"); $machine->sleep(10); my $residue = $machine->succeed("ip tuntap list"); $residue eq "" or die( "Some virtual interface has not been properly cleaned:\n", "$residue\n" ); ''; }; privacy = { name = "Privacy"; nodes.router = { ... }: { virtualisation.vlans = [ 1 ]; boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = true; networking = { useNetworkd = networkd; interfaces.eth1.ipv6.addresses = singleton { address = "fd00:1234:5678:1::1"; prefixLength = 64; }; }; services.radvd = { enable = true; config = '' interface eth1 { AdvSendAdvert on; AdvManagedFlag on; AdvOtherConfigFlag on; prefix fd00:1234:5678:1::/64 { AdvAutonomous on; AdvOnLink on; }; }; ''; }; }; nodes.clientWithPrivacy = { pkgs, ... }: with pkgs.lib; { virtualisation.vlans = [ 1 ]; networking = { useNetworkd = networkd; useDHCP = true; interfaces.eth1 = { preferTempAddress = true; ipv4.addresses = mkOverride 0 [ ]; ipv6.addresses = mkOverride 0 [ ]; }; }; }; nodes.client = { pkgs, ... }: with pkgs.lib; { virtualisation.vlans = [ 1 ]; networking = { useNetworkd = networkd; useDHCP = true; interfaces.eth1 = { preferTempAddress = false; ipv4.addresses = mkOverride 0 [ ]; ipv6.addresses = mkOverride 0 [ ]; }; }; }; testScript = { ... }: '' startAll; $client->waitForUnit("network.target"); $clientWithPrivacy->waitForUnit("network.target"); $router->waitForUnit("network-online.target"); # Wait until we have an ip address $clientWithPrivacy->waitUntilSucceeds("ip addr show dev eth1 | grep -q 'fd00:1234:5678:1:'"); $client->waitUntilSucceeds("ip addr show dev eth1 | grep -q 'fd00:1234:5678:1:'"); # Test vlan 1 $clientWithPrivacy->waitUntilSucceeds("ping -c 1 fd00:1234:5678:1::1"); $client->waitUntilSucceeds("ping -c 1 fd00:1234:5678:1::1"); # Test address used is temporary $clientWithPrivacy->waitUntilSucceeds("! ip route get fd00:1234:5678:1::1 | grep -q ':[a-f0-9]*ff:fe[a-f0-9]*:'"); # Test address used is EUI-64 $client->waitUntilSucceeds("ip route get fd00:1234:5678:1::1 | grep -q ':[a-f0-9]*ff:fe[a-f0-9]*:'"); ''; }; routes = { name = "routes"; machine = { networking.useDHCP = false; networking.interfaces."eth0" = { ipv4.addresses = [ { address = "192.168.1.2"; prefixLength = 24; } ]; ipv6.addresses = [ { address = "2001:1470:fffd:2097::"; prefixLength = 64; } ]; ipv6.routes = [ { address = "fdfd:b3f0::"; prefixLength = 48; } { address = "2001:1470:fffd:2098::"; prefixLength = 64; via = "fdfd:b3f0::1"; } ]; ipv4.routes = [ { address = "10.0.0.0"; prefixLength = 16; options = { mtu = "1500"; }; } { address = "192.168.2.0"; prefixLength = 24; via = "192.168.1.1"; } ]; }; virtualisation.vlans = [ ]; }; testScript = '' my $targetIPv4Table = <<'END'; 10.0.0.0/16 proto static scope link mtu 1500 192.168.1.0/24 proto kernel scope link src 192.168.1.2 192.168.2.0/24 via 192.168.1.1 proto static END my $targetIPv6Table = <<'END'; 2001:1470:fffd:2097::/64 proto kernel metric 256 pref medium 2001:1470:fffd:2098::/64 via fdfd:b3f0::1 proto static metric 1024 pref medium fdfd:b3f0::/48 proto static metric 1024 pref medium END $machine->start; $machine->waitForUnit("network.target"); # test routing tables my $ipv4Table = $machine->succeed("ip -4 route list dev eth0 | head -n3"); my $ipv6Table = $machine->succeed("ip -6 route list dev eth0 | head -n3"); "$ipv4Table" eq "$targetIPv4Table" or die( "The IPv4 routing table does not match the expected one:\n", "Result:\n", "$ipv4Table\n", "Expected:\n", "$targetIPv4Table\n" ); "$ipv6Table" eq "$targetIPv6Table" or die( "The IPv6 routing table does not match the expected one:\n", "Result:\n", "$ipv6Table\n", "Expected:\n", "$targetIPv6Table\n" ); # test clean-up of the tables $machine->succeed("systemctl stop network-addresses-eth0"); my $ipv4Residue = $machine->succeed("ip -4 route list dev eth0 | head -n-3"); my $ipv6Residue = $machine->succeed("ip -6 route list dev eth0 | head -n-3"); $ipv4Residue eq "" or die( "The IPv4 routing table has not been properly cleaned:\n", "$ipv4Residue\n" ); $ipv6Residue eq "" or die( "The IPv6 routing table has not been properly cleaned:\n", "$ipv6Residue\n" ); ''; }; }; in mapAttrs (const (attrs: makeTest (attrs // { name = "${attrs.name}-Networking-${if networkd then "Networkd" else "Scripted"}"; }))) testCases