--- title: User's Guide for Haskell in Nixpkgs author: Peter Simons date: 2015-06-01 --- # User's Guide to the Haskell Infrastructure ## How to install Haskell packages Nixpkgs distributes build instructions for all Haskell packages registered on [Hackage](http://hackage.haskell.org/), but strangely enough normal Nix package lookups don't seem to discover any of them, except for the default version of ghc, cabal-install, and stack: ``` $ nix-env -i alex error: selector ‘alex’ matches no derivations $ nix-env -qa ghc ghc-7.10.2 ``` The Haskell package set is not registered in the top-level namespace because it is *huge*. If all Haskell packages were visible to these commands, then name-based search/install operations would be much slower than they are now. We avoided that by keeping all Haskell-related packages in a separate attribute set called `haskellPackages`, which the following command will list: ``` $ nix-env -f "" -qaP -A haskellPackages haskellPackages.a50 a50-0.5 haskellPackages.abacate haskell-abacate-0.0.0.0 haskellPackages.abcBridge haskell-abcBridge-0.12 haskellPackages.afv afv-0.1.1 haskellPackages.alex alex-3.1.4 haskellPackages.Allure Allure-0.4.101.1 haskellPackages.alms alms-0.6.7 [... some 8000 entries omitted ...] ``` To install any of those packages into your profile, refer to them by their attribute path (first column): ```shell nix-env -f "" -iA haskellPackages.Allure ... ``` The attribute path of any Haskell packages corresponds to the name of that particular package on Hackage: the package `cabal-install` has the attribute `haskellPackages.cabal-install`, and so on. (Actually, this convention causes trouble with packages like `3dmodels` and `4Blocks`, because these names are invalid identifiers in the Nix language. The issue of how to deal with these rare corner cases is currently unresolved.) Haskell packages who's Nix name (second column) begins with a `haskell-` prefix are packages that provide a library whereas packages without that prefix provide just executables. Libraries may provide executables too, though: the package `haskell-pandoc`, for example, installs both a library and an application. You can install and use Haskell executables just like any other program in Nixpkgs, but using Haskell libraries for development is a bit trickier and we'll address that subject in great detail in section [How to create a development environment]. Attribute paths are deterministic inside of Nixpkgs, but the path necessary to reach Nixpkgs varies from system to system. We dodged that problem by giving `nix-env` an explicit `-f ""` parameter, but if you call `nix-env` without that flag, then chances are the invocation fails: ``` $ nix-env -iA haskellPackages.cabal-install error: attribute ‘haskellPackages’ in selection path ‘haskellPackages.cabal-install’ not found ``` On NixOS, for example, Nixpkgs does *not* exist in the top-level namespace by default. To figure out the proper attribute path, it's easiest to query for the path of a well-known Nixpkgs package, i.e.: ``` $ nix-env -qaP coreutils nixos.coreutils coreutils-8.23 ``` If your system responds like that (most NixOS installations will), then the attribute path to `haskellPackages` is `nixos.haskellPackages`. Thus, if you want to use `nix-env` without giving an explicit `-f` flag, then that's the way to do it: ```shell nix-env -qaP -A nixos.haskellPackages nix-env -iA nixos.haskellPackages.cabal-install ``` Our current default compiler is GHC 7.10.x and the `haskellPackages` set contains packages built with that particular version. Nixpkgs contains the latest major release of every GHC since 6.10.4, however, and there is a whole family of package sets available that defines Hackage packages built with each of those compilers, too: ```shell nix-env -f "" -qaP -A haskell.packages.ghc6123 nix-env -f "" -qaP -A haskell.packages.ghc763 ``` The name `haskellPackages` is really just a synonym for `haskell.packages.ghc7102`, because we prefer that package set internally and recommend it to our users as their default choice, but ultimately you are free to compile your Haskell packages with any GHC version you please. The following command displays the complete list of available compilers: ``` $ nix-env -f "" -qaP -A haskell.compiler haskell.compiler.ghc6104 ghc-6.10.4 haskell.compiler.ghc6123 ghc-6.12.3 haskell.compiler.ghc704 ghc-7.0.4 haskell.compiler.ghc722 ghc-7.2.2 haskell.compiler.ghc742 ghc-7.4.2 haskell.compiler.ghc763 ghc-7.6.3 haskell.compiler.ghc784 ghc-7.8.4 haskell.compiler.ghc7102 ghc-7.10.2 haskell.compiler.ghcHEAD ghc-7.11.20150402 haskell.compiler.ghcNokinds ghc-nokinds-7.11.20150704 haskell.compiler.ghcjs ghcjs-0.1.0 haskell.compiler.jhc jhc-0.8.2 haskell.compiler.uhc uhc-1.1.9.0 ``` We have no package sets for `jhc` or `uhc` yet, unfortunately, but for every version of GHC listed above, there exists a package set based on that compiler. Also, the attributes `haskell.compiler.ghcXYC` and `haskell.packages.ghcXYC.ghc` are synonymous for the sake of convenience. ## How to create a development environment ### How to install a compiler A simple development environment consists of a Haskell compiler and one or both of the tools `cabal-install` and `stack`. We saw in section [How to install Haskell packages] how you can install those programs into your user profile: ```shell nix-env -f "" -iA haskellPackages.ghc haskellPackages.cabal-install ``` Instead of the default package set `haskellPackages`, you can also use the more precise name `haskell.compiler.ghc7102`, which has the advantage that it refers to the same GHC version regardless of what Nixpkgs considers "default" at any given time. Once you've made those tools available in `$PATH`, it's possible to build Hackage packages the same way people without access to Nix do it all the time: ```shell cabal get lens-4.11 && cd lens-4.11 cabal install -j --dependencies-only cabal configure cabal build ``` If you enjoy working with Cabal sandboxes, then that's entirely possible too: just execute the command ```shell cabal sandbox init ``` before installing the required dependencies. The `nix-shell` utility makes it easy to switch to a different compiler version; just enter the Nix shell environment with the command ```shell nix-shell -p haskell.compiler.ghc784 ``` to bring GHC 7.8.4 into `$PATH`. Alternatively, you can use Stack instead of `nix-shell` directly to select compiler versions and other build tools per-project. It uses `nix-shell` under the hood when Nix support is turned on. See [How to build a Haskell project using Stack]. If you're using `cabal-install`, re-running `cabal configure` inside the spawned shell switches your build to use that compiler instead. If you're working on a project that doesn't depend on any additional system libraries outside of GHC, then it's even sufficient to just run the `cabal configure` command inside of the shell: ```shell nix-shell -p haskell.compiler.ghc784 --command "cabal configure" ``` Afterwards, all other commands like `cabal build` work just fine in any shell environment, because the configure phase recorded the absolute paths to all required tools like GHC in its build configuration inside of the `dist/` directory. Please note, however, that `nix-collect-garbage` can break such an environment because the Nix store paths created by `nix-shell` aren't "alive" anymore once `nix-shell` has terminated. If you find that your Haskell builds no longer work after garbage collection, then you'll have to re-run `cabal configure` inside of a new `nix-shell` environment. ### How to install a compiler with libraries GHC expects to find all installed libraries inside of its own `lib` directory. This approach works fine on traditional Unix systems, but it doesn't work for Nix, because GHC's store path is immutable once it's built. We cannot install additional libraries into that location. As a consequence, our copies of GHC don't know any packages except their own core libraries, like `base`, `containers`, `Cabal`, etc. We can register additional libraries to GHC, however, using a special build function called `ghcWithPackages`. That function expects one argument: a function that maps from an attribute set of Haskell packages to a list of packages, which determines the libraries known to that particular version of GHC. For example, the Nix expression `ghcWithPackages (pkgs: [pkgs.mtl])` generates a copy of GHC that has the `mtl` library registered in addition to its normal core packages: ``` $ nix-shell -p "haskellPackages.ghcWithPackages (pkgs: [pkgs.mtl])" [nix-shell:~]$ ghc-pkg list mtl /nix/store/zy79...-ghc-7.10.2/lib/ghc-7.10.2/package.conf.d: mtl-2.2.1 ``` This function allows users to define their own development environment by means of an override. After adding the following snippet to `~/.config/nixpkgs/config.nix`, ```nix { packageOverrides = super: let self = super.pkgs; in { myHaskellEnv = self.haskell.packages.ghc7102.ghcWithPackages (haskellPackages: with haskellPackages; [ # libraries arrows async cgi criterion # tools cabal-install haskintex ]); }; } ``` it's possible to install that compiler with `nix-env -f "" -iA myHaskellEnv`. If you'd like to switch that development environment to a different version of GHC, just replace the `ghc7102` bit in the previous definition with the appropriate name. Of course, it's also possible to define any number of these development environments! (You can't install two of them into the same profile at the same time, though, because that would result in file conflicts.) The generated `ghc` program is a wrapper script that re-directs the real GHC executable to use a new `lib` directory --- one that we specifically constructed to contain all those packages the user requested: ``` $ cat $(type -p ghc) #! /nix/store/xlxj...-bash-4.3-p33/bin/bash -e export NIX_GHC=/nix/store/19sm...-ghc-7.10.2/bin/ghc export NIX_GHCPKG=/nix/store/19sm...-ghc-7.10.2/bin/ghc-pkg export NIX_GHC_DOCDIR=/nix/store/19sm...-ghc-7.10.2/share/doc/ghc/html export NIX_GHC_LIBDIR=/nix/store/19sm...-ghc-7.10.2/lib/ghc-7.10.2 exec /nix/store/j50p...-ghc-7.10.2/bin/ghc "-B$NIX_GHC_LIBDIR" "$@" ``` The variables `$NIX_GHC`, `$NIX_GHCPKG`, etc. point to the *new* store path `ghcWithPackages` constructed specifically for this environment. The last line of the wrapper script then executes the real `ghc`, but passes the path to the new `lib` directory using GHC's `-B` flag. The purpose of those environment variables is to work around an impurity in the popular [ghc-paths](http://hackage.haskell.org/package/ghc-paths) library. That library promises to give its users access to GHC's installation paths. Only, the library can't possible know that path when it's compiled, because the path GHC considers its own is determined only much later, when the user configures it through `ghcWithPackages`. So we [patched ghc-paths](https://github.com/NixOS/nixpkgs/blob/master/pkgs/development/haskell-modules/patches/ghc-paths-nix.patch) to return the paths found in those environment variables at run-time rather than trying to guess them at compile-time. To make sure that mechanism works properly all the time, we recommend that you set those variables to meaningful values in your shell environment, too, i.e. by adding the following code to your `~/.bashrc`: ```bash if type >/dev/null 2>&1 -p ghc; then eval "$(egrep ^export "$(type -p ghc)")" fi ``` If you are certain that you'll use only one GHC environment which is located in your user profile, then you can use the following code, too, which has the advantage that it doesn't contain any paths from the Nix store, i.e. those settings always remain valid even if a `nix-env -u` operation updates the GHC environment in your profile: ```bash if [ -e ~/.nix-profile/bin/ghc ]; then export NIX_GHC="$HOME/.nix-profile/bin/ghc" export NIX_GHCPKG="$HOME/.nix-profile/bin/ghc-pkg" export NIX_GHC_DOCDIR="$HOME/.nix-profile/share/doc/ghc/html" export NIX_GHC_LIBDIR="$HOME/.nix-profile/lib/ghc-$($NIX_GHC --numeric-version)" fi ``` ### How to install a compiler with libraries, hoogle and documentation indexes If you plan to use your environment for interactive programming, not just compiling random Haskell code, you might want to replace `ghcWithPackages` in all the listings above with `ghcWithHoogle`. This environment generator not only produces an environment with GHC and all the specified libraries, but also generates a `hoogle` and `haddock` indexes for all the packages, and provides a wrapper script around `hoogle` binary that uses all those things. A precise name for this thing would be "`ghcWithPackagesAndHoogleAndDocumentationIndexes`", which is, regrettably, too long and scary. For example, installing the following environment ```nix { packageOverrides = super: let self = super.pkgs; in { myHaskellEnv = self.haskellPackages.ghcWithHoogle (haskellPackages: with haskellPackages; [ # libraries arrows async cgi criterion # tools cabal-install haskintex ]); }; } ``` allows one to browse module documentation index [not too dissimilar to this](https://downloads.haskell.org/~ghc/latest/docs/html/libraries/index.html) for all the specified packages and their dependencies by directing a browser of choice to `~/.nix-profiles/share/doc/hoogle/index.html` (or `/run/current-system/sw/share/doc/hoogle/index.html` in case you put it in `environment.systemPackages` in NixOS). After you've marveled enough at that try adding the following to your `~/.ghc/ghci.conf` ``` :def hoogle \s -> return $ ":! hoogle search -cl --count=15 \"" ++ s ++ "\"" :def doc \s -> return $ ":! hoogle search -cl --info \"" ++ s ++ "\"" ``` and test it by typing into `ghci`: ``` :hoogle a -> a :doc a -> a ``` Be sure to note the links to `haddock` files in the output. With any modern and properly configured terminal emulator you can just click those links to navigate there. Finally, you can run ```shell hoogle server -p 8080 ``` and navigate to http://localhost:8080/ for your own local [Hoogle](https://www.haskell.org/hoogle/). Note, however, that Firefox and possibly other browsers disallow navigation from `http:` to `file:` URIs for security reasons, which might be quite an inconvenience. See [this page](http://kb.mozillazine.org/Links_to_local_pages_do_not_work) for workarounds. ### How to build a Haskell project using Stack [Stack](http://haskellstack.org) is a popular build tool for Haskell projects. It has first-class support for Nix. Stack can optionally use Nix to automatically select the right version of GHC and other build tools to build, test and execute apps in an existing project downloaded from somewhere on the Internet. Pass the `--nix` flag to any `stack` command to do so, e.g. ```shell git clone --recursive http://github.com/yesodweb/wai cd wai stack --nix build ``` If you want `stack` to use Nix by default, you can add a `nix` section to the `stack.yaml` file, as explained in the [Stack documentation][stack-nix-doc]. For example: ```yaml nix: enable: true packages: [pkgconfig zeromq zlib] ``` The example configuration snippet above tells Stack to create an ad hoc environment for `nix-shell` as in the below section, in which the `pkgconfig`, `zeromq` and `zlib` packages from Nixpkgs are available. All `stack` commands will implicitly be executed inside this ad hoc environment. Some projects have more sophisticated needs. For examples, some ad hoc environments might need to expose Nixpkgs packages compiled in a certain way, or with extra environment variables. In these cases, you'll need a `shell` field instead of `packages`: ```yaml nix: enable: true shell-file: shell.nix ``` For more on how to write a `shell.nix` file see the below section. You'll need to express a derivation. Note that Nixpkgs ships with a convenience wrapper function around `mkDerivation` called `haskell.lib.buildStackProject` to help you create this derivation in exactly the way Stack expects. All of the same inputs as `mkDerivation` can be provided. For example, to build a Stack project that including packages that link against a version of the R library compiled with special options turned on: ```nix with (import { }); let R = pkgs.R.override { enableStrictBarrier = true; }; in haskell.lib.buildStackProject { name = "HaskellR"; buildInputs = [ R zeromq zlib ]; } ``` You can select a particular GHC version to compile with by setting the `ghc` attribute as an argument to `buildStackProject`. Better yet, let Stack choose what GHC version it wants based on the snapshot specified in `stack.yaml` (only works with Stack >= 1.1.3): ```nix {nixpkgs ? import { }, ghc ? nixpkgs.ghc}: with nixpkgs; let R = pkgs.R.override { enableStrictBarrier = true; }; in haskell.lib.buildStackProject { name = "HaskellR"; buildInputs = [ R zeromq zlib ]; inherit ghc; } ``` [stack-nix-doc]: http://docs.haskellstack.org/en/stable/nix_integration.html ### How to create ad hoc environments for `nix-shell` The easiest way to create an ad hoc development environment is to run `nix-shell` with the appropriate GHC environment given on the command-line: ```shell nix-shell -p "haskellPackages.ghcWithPackages (pkgs: with pkgs; [mtl pandoc])" ``` For more sophisticated use-cases, however, it's more convenient to save the desired configuration in a file called `shell.nix` that looks like this: ```nix { nixpkgs ? import {}, compiler ? "ghc7102" }: let inherit (nixpkgs) pkgs; ghc = pkgs.haskell.packages.${compiler}.ghcWithPackages (ps: with ps; [ monad-par mtl ]); in pkgs.stdenv.mkDerivation { name = "my-haskell-env-0"; buildInputs = [ ghc ]; shellHook = "eval $(egrep ^export ${ghc}/bin/ghc)"; } ``` Now run `nix-shell` --- or even `nix-shell --pure` --- to enter a shell environment that has the appropriate compiler in `$PATH`. If you use `--pure`, then add all other packages that your development environment needs into the `buildInputs` attribute. If you'd like to switch to a different compiler version, then pass an appropriate `compiler` argument to the expression, i.e. `nix-shell --argstr compiler ghc784`. If you need such an environment because you'd like to compile a Hackage package outside of Nix --- i.e. because you're hacking on the latest version from Git ---, then the package set provides suitable nix-shell environments for you already! Every Haskell package has an `env` attribute that provides a shell environment suitable for compiling that particular package. If you'd like to hack the `lens` library, for example, then you just have to check out the source code and enter the appropriate environment: ``` $ cabal get lens-4.11 && cd lens-4.11 Downloading lens-4.11... Unpacking to lens-4.11/ $ nix-shell "" -A haskellPackages.lens.env [nix-shell:/tmp/lens-4.11]$ ``` At point, you can run `cabal configure`, `cabal build`, and all the other development commands. Note that you need `cabal-install` installed in your `$PATH` already to use it here --- the `nix-shell` environment does not provide it. ## How to create Nix builds for your own private Haskell packages If your own Haskell packages have build instructions for Cabal, then you can convert those automatically into build instructions for Nix using the `cabal2nix` utility, which you can install into your profile by running `nix-env -i cabal2nix`. ### How to build a stand-alone project For example, let's assume that you're working on a private project called `foo`. To generate a Nix build expression for it, change into the project's top-level directory and run the command: ```shell cabal2nix . > foo.nix ``` Then write the following snippet into a file called `default.nix`: ```nix { nixpkgs ? import {}, compiler ? "ghc7102" }: nixpkgs.pkgs.haskell.packages.${compiler}.callPackage ./foo.nix { } ``` Finally, store the following code in a file called `shell.nix`: ```nix { nixpkgs ? import {}, compiler ? "ghc7102" }: (import ./default.nix { inherit nixpkgs compiler; }).env ``` At this point, you can run `nix-build` to have Nix compile your project and install it into a Nix store path. The local directory will contain a symlink called `result` after `nix-build` returns that points into that location. Of course, passing the flag `--argstr compiler ghc763` allows switching the build to any version of GHC currently supported. Furthermore, you can call `nix-shell` to enter an interactive development environment in which you can use `cabal configure` and `cabal build` to develop your code. That environment will automatically contain a proper GHC derivation with all the required libraries registered as well as all the system-level libraries your package might need. If your package does not depend on any system-level libraries, then it's sufficient to run ```shell nix-shell --command "cabal configure" ``` once to set up your build. `cabal-install` determines the absolute paths to all resources required for the build and writes them into a config file in the `dist/` directory. Once that's done, you can run `cabal build` and any other command for that project even outside of the `nix-shell` environment. This feature is particularly nice for those of us who like to edit their code with an IDE, like Emacs' `haskell-mode`, because it's not necessary to start Emacs inside of nix-shell just to make it find out the necessary settings for building the project; `cabal-install` has already done that for us. If you want to do some quick-and-dirty hacking and don't want to bother setting up a `default.nix` and `shell.nix` file manually, then you can use the `--shell` flag offered by `cabal2nix` to have it generate a stand-alone `nix-shell` environment for you. With that feature, running ```shell cabal2nix --shell . > shell.nix nix-shell --command "cabal configure" ``` is usually enough to set up a build environment for any given Haskell package. You can even use that generated file to run `nix-build`, too: ```shell nix-build shell.nix ``` ### How to build projects that depend on each other If you have multiple private Haskell packages that depend on each other, then you'll have to register those packages in the Nixpkgs set to make them visible for the dependency resolution performed by `callPackage`. First of all, change into each of your projects top-level directories and generate a `default.nix` file with `cabal2nix`: ```shell cd ~/src/foo && cabal2nix . > default.nix cd ~/src/bar && cabal2nix . > default.nix ``` Then edit your `~/.config/nixpkgs/config.nix` file to register those builds in the default Haskell package set: ```nix { packageOverrides = super: let self = super.pkgs; in { haskellPackages = super.haskellPackages.override { overrides = self: super: { foo = self.callPackage ../src/foo {}; bar = self.callPackage ../src/bar {}; }; }; }; } ``` Once that's accomplished, `nix-env -f "" -qA haskellPackages` will show your packages like any other package from Hackage, and you can build them ```shell nix-build "" -A haskellPackages.foo ``` or enter an interactive shell environment suitable for building them: ```shell nix-shell "" -A haskellPackages.bar.env ``` ## Miscellaneous Topics ### How to build with profiling enabled Every Haskell package set takes a function called `overrides` that you can use to manipulate the package as much as you please. One useful application of this feature is to replace the default `mkDerivation` function with one that enables library profiling for all packages. To accomplish that, add configure the following snippet in your `~/.config/nixpkgs/config.nix` file: ```nix { packageOverrides = super: let self = super.pkgs; in { profiledHaskellPackages = self.haskellPackages.override { overrides = self: super: { mkDerivation = args: super.mkDerivation (args // { enableLibraryProfiling = true; }); }; }; }; } ``` Then, replace instances of `haskellPackages` in the `cabal2nix`-generated `default.nix` or `shell.nix` files with `profiledHaskellPackages`. ### How to override package versions in a compiler-specific package set Nixpkgs provides the latest version of [`ghc-events`](http://hackage.haskell.org/package/ghc-events), which is 0.4.4.0 at the time of this writing. This is fine for users of GHC 7.10.x, but GHC 7.8.4 cannot compile that binary. Now, one way to solve that problem is to register an older version of `ghc-events` in the 7.8.x-specific package set. The first step is to generate Nix build instructions with `cabal2nix`: ```shell cabal2nix cabal://ghc-events-0.4.3.0 > ~/.nixpkgs/ghc-events-0.4.3.0.nix ``` Then add the override in `~/.config/nixpkgs/config.nix`: ```nix { packageOverrides = super: let self = super.pkgs; in { haskell = super.haskell // { packages = super.haskell.packages // { ghc784 = super.haskell.packages.ghc784.override { overrides = self: super: { ghc-events = self.callPackage ./ghc-events-0.4.3.0.nix {}; }; }; }; }; }; } ``` This code is a little crazy, no doubt, but it's necessary because the intuitive version ```nix { # ... haskell.packages.ghc784 = super.haskell.packages.ghc784.override { overrides = self: super: { ghc-events = self.callPackage ./ghc-events-0.4.3.0.nix {}; }; }; } ``` doesn't do what we want it to: that code replaces the `haskell` package set in Nixpkgs with one that contains only one entry,`packages`, which contains only one entry `ghc784`. This override loses the `haskell.compiler` set, and it loses the `haskell.packages.ghcXYZ` sets for all compilers but GHC 7.8.4. To avoid that problem, we have to perform the convoluted little dance from above, iterating over each step in hierarchy. Once it's accomplished, however, we can install a variant of `ghc-events` that's compiled with GHC 7.8.4: ```shell nix-env -f "" -iA haskell.packages.ghc784.ghc-events ``` Unfortunately, it turns out that this build fails again while executing the test suite! Apparently, the release archive on Hackage is missing some data files that the test suite requires, so we cannot run it. We accomplish that by re-generating the Nix expression with the `--no-check` flag: ```shell cabal2nix --no-check cabal://ghc-events-0.4.3.0 > ~/.nixpkgs/ghc-events-0.4.3.0.nix ``` Now the builds succeeds. Of course, in the concrete example of `ghc-events` this whole exercise is not an ideal solution, because `ghc-events` can analyze the output emitted by any version of GHC later than 6.12 regardless of the compiler version that was used to build the `ghc-events` executable, so strictly speaking there's no reason to prefer one built with GHC 7.8.x in the first place. However, for users who cannot use GHC 7.10.x at all for some reason, the approach of downgrading to an older version might be useful. ### How to recover from GHC's infamous non-deterministic library ID bug GHC and distributed build farms don't get along well: - https://ghc.haskell.org/trac/ghc/ticket/4012 When you see an error like this one ``` package foo-0.7.1.0 is broken due to missing package text-1.2.0.4-98506efb1b9ada233bb5c2b2db516d91 ``` then you have to download and re-install `foo` and all its dependents from scratch: ```shell nix-store -q --referrers /nix/store/*-haskell-text-1.2.0.4 \ | xargs -L 1 nix-store --repair-path ``` If you're using additional Hydra servers other than `hydra.nixos.org`, then it might be necessary to purge the local caches that store data from those machines to disable these binary channels for the duration of the previous command, i.e. by running: ```shell rm /nix/var/nix/binary-cache-v3.sqlite rm /nix/var/nix/manifests/* rm /nix/var/nix/channel-cache/* ``` ### Builds on Darwin fail with `math.h` not found Users of GHC on Darwin have occasionally reported that builds fail, because the compiler complains about a missing include file: ``` fatal error: 'math.h' file not found ``` The issue has been discussed at length in [ticket 6390](https://github.com/NixOS/nixpkgs/issues/6390), and so far no good solution has been proposed. As a work-around, users who run into this problem can configure the environment variables ```shell export NIX_CFLAGS_COMPILE="-idirafter /usr/include" export NIX_CFLAGS_LINK="-L/usr/lib" ``` in their `~/.bashrc` file to avoid the compiler error. ### Builds using Stack complain about missing system libraries ``` -- While building package zlib-0.5.4.2 using: runhaskell -package=Cabal-1.22.4.0 -clear-package-db [... lots of flags ...] Process exited with code: ExitFailure 1 Logs have been written to: /home/foo/src/stack-ide/.stack-work/logs/zlib-0.5.4.2.log Configuring zlib-0.5.4.2... Setup.hs: Missing dependency on a foreign library: * Missing (or bad) header file: zlib.h This problem can usually be solved by installing the system package that provides this library (you may need the "-dev" version). If the library is already installed but in a non-standard location then you can use the flags --extra-include-dirs= and --extra-lib-dirs= to specify where it is. If the header file does exist, it may contain errors that are caught by the C compiler at the preprocessing stage. In this case you can re-run configure with the verbosity flag -v3 to see the error messages. ``` When you run the build inside of the nix-shell environment, the system is configured to find `libz.so` without any special flags -- the compiler and linker "just know" how to find it. Consequently, Cabal won't record any search paths for `libz.so` in the package description, which means that the package works fine inside of nix-shell, but once you leave the shell the shared object can no longer be found. That issue is by no means specific to Stack: you'll have that problem with any other Haskell package that's built inside of nix-shell but run outside of that environment. You can remedy this issue in several ways. The easiest is to add a `nix` section to the `stack.yaml` like the following: ```yaml nix: enable: true packages: [ zlib ] ``` Stack's Nix support knows to add `${zlib.out}/lib` and `${zlib.dev}/include` as an `--extra-lib-dirs` and `extra-include-dirs`, respectively. Alternatively, you can achieve the same effect by hand. First of all, run ``` $ nix-build --no-out-link "" -A zlib /nix/store/alsvwzkiw4b7ip38l4nlfjijdvg3fvzn-zlib-1.2.8 ``` to find out the store path of the system's zlib library. Now, you can 1. add that path (plus a "/lib" suffix) to your `$LD_LIBRARY_PATH` environment variable to make sure your system linker finds `libz.so` automatically. It's no pretty solution, but it will work. 2. As a variant of (1), you can also install any number of system libraries into your user's profile (or some other profile) and point `$LD_LIBRARY_PATH` to that profile instead, so that you don't have to list dozens of those store paths all over the place. 3. The solution I prefer is to call stack with an appropriate --extra-lib-dirs flag like so: ```shell stack --extra-lib-dirs=/nix/store/alsvwzkiw4b7ip38l4nlfjijdvg3fvzn-zlib-1.2.8/lib build ``` Typically, you'll need `--extra-include-dirs` as well. It's possible to add those flag to the project's `stack.yaml` or your user's global `~/.stack/global/stack.yaml` file so that you don't have to specify them manually every time. But again, you're likely better off using Stack's Nix support instead. The same thing applies to `cabal configure`, of course, if you're building with `cabal-install` instead of Stack. ### Creating statically linked binaries There are two levels of static linking. The first option is to configure the build with the Cabal flag `--disable-executable-dynamic`. In Nix expressions, this can be achieved by setting the attribute: ``` enableSharedExecutables = false; ``` That gives you a binary with statically linked Haskell libraries and dynamically linked system libraries. To link both Haskell libraries and system libraries statically, the additional flags `--ghc-option=-optl=-static --ghc-option=-optl=-pthread` need to be used. In Nix, this is accomplished with: ``` configureFlags = [ "--ghc-option=-optl=-static" "--ghc-option=-optl=-pthread" ]; ``` It's important to realize, however, that most system libraries in Nix are built as shared libraries only, i.e. there is just no static library available that Cabal could link! ### Building GHC with integer-simple By default GHC implements the Integer type using the [GNU Multiple Precision Arithmetic (GMP) library](https://gmplib.org/). The implementation can be found in the [integer-gmp](http://hackage.haskell.org/package/integer-gmp) package. A potential problem with this is that GMP is licensed under the [GNU Lesser General Public License (LGPL)](http://www.gnu.org/copyleft/lesser.html), a kind of "copyleft" license. According to the terms of the LGPL, paragraph 5, you may distribute a program that is designed to be compiled and dynamically linked with the library under the terms of your choice (i.e., commercially) but if your program incorporates portions of the library, if it is linked statically, then your program is a "derivative"--a "work based on the library"--and according to paragraph 2, section c, you "must cause the whole of the work to be licensed" under the terms of the LGPL (including for free). The LGPL licensing for GMP is a problem for the overall licensing of binary programs compiled with GHC because most distributions (and builds) of GHC use static libraries. (Dynamic libraries are currently distributed only for OS X.) The LGPL licensing situation may be worse: even though [The Glasgow Haskell Compiler License](https://www.haskell.org/ghc/license) is essentially a "free software" license (BSD3), according to paragraph 2 of the LGPL, GHC must be distributed under the terms of the LGPL! To work around these problems GHC can be build with a slower but LGPL-free alternative implemention for Integer called [integer-simple](http://hackage.haskell.org/package/integer-simple). To get a GHC compiler build with `integer-simple` instead of `integer-gmp` use the attribute: `haskell.compiler.integer-simple."${ghcVersion}"`. For example: ``` $ nix-build -E '(import {}).haskell.compiler.integer-simple.ghc802' ... $ result/bin/ghc-pkg list | grep integer integer-simple-0.1.1.1 ``` The following command displays the complete list of GHC compilers build with `integer-simple`: ``` $ nix-env -f "" -qaP -A haskell.compiler.integer-simple haskell.compiler.integer-simple.ghc7102 ghc-7.10.2 haskell.compiler.integer-simple.ghc7103 ghc-7.10.3 haskell.compiler.integer-simple.ghc722 ghc-7.2.2 haskell.compiler.integer-simple.ghc742 ghc-7.4.2 haskell.compiler.integer-simple.ghc783 ghc-7.8.3 haskell.compiler.integer-simple.ghc784 ghc-7.8.4 haskell.compiler.integer-simple.ghc801 ghc-8.0.1 haskell.compiler.integer-simple.ghc802 ghc-8.0.2 haskell.compiler.integer-simple.ghcHEAD ghc-8.1.20170106 ``` To get a package set supporting `integer-simple` use the attribute: `haskell.packages.integer-simple."${ghcVersion}"`. For example use the following to get the `scientific` package build with `integer-simple`: ```shell nix-build -A haskell.packages.integer-simple.ghc802.scientific ``` ## Other resources - The Youtube video [Nix Loves Haskell](https://www.youtube.com/watch?v=BsBhi_r-OeE) provides an introduction into Haskell NG aimed at beginners. The slides are available at http://cryp.to/nixos-meetup-3-slides.pdf and also -- in a form ready for cut & paste -- at https://github.com/NixOS/cabal2nix/blob/master/doc/nixos-meetup-3-slides.md. - Another Youtube video is [Escaping Cabal Hell with Nix](https://www.youtube.com/watch?v=mQd3s57n_2Y), which discusses the subject of Haskell development with Nix but also provides a basic introduction to Nix as well, i.e. it's suitable for viewers with almost no prior Nix experience. - Oliver Charles wrote a very nice [Tutorial how to develop Haskell packages with Nix](http://wiki.ocharles.org.uk/Nix). - The *Journey into the Haskell NG infrastructure* series of postings describe the new Haskell infrastructure in great detail: - [Part 1](https://nixos.org/nix-dev/2015-January/015591.html) explains the differences between the old and the new code and gives instructions how to migrate to the new setup. - [Part 2](https://nixos.org/nix-dev/2015-January/015608.html) looks in-depth at how to tweak and configure your setup by means of overrides. - [Part 3](https://nixos.org/nix-dev/2015-April/016912.html) describes the infrastructure that keeps the Haskell package set in Nixpkgs up-to-date.