Functions reference The nixpkgs repository has several utility functions to manipulate Nix expressions.
pkgs.overridePackages This function inside the nixpkgs expression (pkgs) can be used to override the set of packages itself. Warning: this function is expensive and must not be used from within the nixpkgs repository. Example usage: let pkgs = import <nixpkgs> {}; newpkgs = pkgs.overridePackages (self: super: { foo = super.foo.override { ... }; }; in ... The resulting newpkgs will have the new foo expression, and all other expressions depending on foo will also use the new foo expression. The behavior of this function is similar to config.packageOverrides. The self parameter refers to the final package set with the applied overrides. Using this parameter may lead to infinite recursion if not used consciously. The super parameter refers to the old package set. It's equivalent to pkgs in the above example. Note that in previous versions of nixpkgs, this method replaced any changes from config.packageOverrides, along with that from previous calls if this function was called repeatedly. Now those previous changes will be preserved so this function can be "chained" meaningfully. To recover the old behavior, make sure config.packageOverrides is unset, and call this only once off a "freshly" imported nixpkgs: let pkgs = import <nixpkgs> { config: {}; }; newpkgs = pkgs.overridePackages ...; in ...
<pkg>.override The function override is usually available for all the derivations in the nixpkgs expression (pkgs). It is used to override the arguments passed to a function. Example usages: pkgs.foo.override { arg1 = val1; arg2 = val2; ... } pkgs.overridePackages (self: super: { foo = super.foo.override { barSupport = true ; }; }) mypkg = pkgs.callPackage ./mypkg.nix { mydep = pkgs.mydep.override { ... }; }) In the first example, pkgs.foo is the result of a function call with some default arguments, usually a derivation. Using pkgs.foo.override will call the same function with the given new arguments.
<pkg>.overrideAttrs The function overrideAttrs allows overriding the attribute set passed to a stdenv.mkDerivation call, producing a new derivation based on the original one. This function is available on all derivations produced by the stdenv.mkDerivation function, which is most packages in the nixpkgs expression pkgs. Example usage: helloWithDebug = pkgs.hello.overrideAttrs (oldAttrs: rec { separateDebugInfo = true; }); In the above example, the separateDebugInfo attribute is overriden to be true, thus building debug info for helloWithDebug, while all other attributes will be retained from the original hello package. The argument oldAttrs is conventionally used to refer to the attr set originally passed to stdenv.mkDerivation. Note that separateDebugInfo is processed only by the stdenv.mkDerivation function, not the generated, raw Nix derivation. Thus, using overrideDerivation will not work in this case, as it overrides only the attributes of the final derivation. It is for this reason that overrideAttrs should be preferred in (almost) all cases to overrideDerivation, i.e. to allow using sdenv.mkDerivation to process input arguments, as well as the fact that it is easier to use (you can use the same attribute names you see in your Nix code, instead of the ones generated (e.g. buildInputs vs nativeBuildInputs, and involves less typing.
<pkg>.overrideDerivation You should prefer overrideAttrs in almost all cases, see its documentation for the reasons why. overrideDerivation is not deprecated and will continue to work, but is less nice to use and does not have as many abilities as overrideAttrs. Do not use this function in Nixpkgs as it evaluates a Derivation before modifying it, which breaks package abstraction and removes error-checking of function arguments. In addition, this evaluation-per-function application incurs a performance penalty, which can become a problem if many overrides are used. It is only intended for ad-hoc customisation, such as in ~/.nixpkgs/config.nix. The function overrideDerivation creates a new derivation based on an existing one by overriding the original's attributes with the attribute set produced by the specified function. This function is available on all derivations defined using the makeOverridable function. Most standard derivation-producing functions, such as stdenv.mkDerivation, are defined using this function, which means most packages in the nixpkgs expression, pkgs, have this function. Example usage: mySed = pkgs.gnused.overrideDerivation (oldAttrs: { name = "sed-4.2.2-pre"; src = fetchurl { url = ftp://alpha.gnu.org/gnu/sed/sed-4.2.2-pre.tar.bz2; sha256 = "11nq06d131y4wmf3drm0yk502d2xc6n5qy82cg88rb9nqd2lj41k"; }; patches = []; }); In the above example, the name, src, and patches of the derivation will be overridden, while all other attributes will be retained from the original derivation. The argument oldAttrs is used to refer to the attribute set of the original derivation. A package's attributes are evaluated *before* being modified by the overrideDerivation function. For example, the name attribute reference in url = "mirror://gnu/hello/${name}.tar.gz"; is filled-in *before* the overrideDerivation function modifies the attribute set. This means that overriding the name attribute, in this example, *will not* change the value of the url attribute. Instead, we need to override both the name *and* url attributes.
lib.makeOverridable The function lib.makeOverridable is used to make the result of a function easily customizable. This utility only makes sense for functions that accept an argument set and return an attribute set. Example usage: f = { a, b }: { result = a+b; } c = lib.makeOverridable f { a = 1; b = 2; } The variable c is the value of the f function applied with some default arguments. Hence the value of c.result is 3, in this example. The variable c however also has some additional functions, like c.override which can be used to override the default arguments. In this example the value of (c.override { a = 4; }).result is 6.
buildFHSUserEnv buildFHSUserEnv provides a way to build and run FHS-compatible lightweight sandboxes. It creates an isolated root with bound /nix/store, so its footprint in terms of disk space needed is quite small. This allows one to run software which is hard or unfeasible to patch for NixOS -- 3rd-party source trees with FHS assumptions, games distributed as tarballs, software with integrity checking and/or external self-updated binaries. It uses Linux namespaces feature to create temporary lightweight environments which are destroyed after all child processes exit, without root user rights requirement. Accepted arguments are: name Environment name. targetPkgs Packages to be installed for the main host's architecture (i.e. x86_64 on x86_64 installations). Along with libraries binaries are also installed. multiPkgs Packages to be installed for all architectures supported by a host (i.e. i686 and x86_64 on x86_64 installations). Only libraries are installed by default. extraBuildCommands Additional commands to be executed for finalizing the directory structure. extraBuildCommandsMulti Like extraBuildCommands, but executed only on multilib architectures. extraOutputsToInstall Additional derivation outputs to be linked for both target and multi-architecture packages. extraInstallCommands Additional commands to be executed for finalizing the derivation with runner script. runScript A command that would be executed inside the sandbox and passed all the command line arguments. It defaults to bash. One can create a simple environment using a shell.nix like that: {} }: (pkgs.buildFHSUserEnv { name = "simple-x11-env"; targetPkgs = pkgs: (with pkgs; [ udev alsaLib ]) ++ (with pkgs.xorg; [ libX11 libXcursor libXrandr ]); multiPkgs = pkgs: (with pkgs; [ udev alsaLib ]); runScript = "bash"; }).env ]]> Running nix-shell would then drop you into a shell with these libraries and binaries available. You can use this to run closed-source applications which expect FHS structure without hassles: simply change runScript to the application path, e.g. ./bin/start.sh -- relative paths are supported.
pkgs.dockerTools pkgs.dockerTools is a set of functions for creating and manipulating Docker images according to the Docker Image Specification v1.0.0 . Docker itself is not used to perform any of the operations done by these functions. The dockerTools API is unstable and may be subject to backwards-incompatible changes in the future.
buildImage This function is analogous to the docker build command, in that can used to build a Docker-compatible repository tarball containing a single image with one or multiple layers. As such, the result is suitable for being loaded in Docker with docker load. The parameters of buildImage with relative example values are described below: Docker build buildImage { name = "redis"; tag = "latest"; fromImage = someBaseImage; fromImageName = null; fromImageTag = "latest"; contents = pkgs.redis; runAsRoot = '' #!${stdenv.shell} mkdir -p /data ''; config = { Cmd = [ "/bin/redis-server" ]; WorkingDir = "/data"; Volumes = { "/data" = {}; }; }; } The above example will build a Docker image redis/latest from the given base image. Loading and running this image in Docker results in redis-server being started automatically. name specifies the name of the resulting image. This is the only required argument for buildImage. tag specifies the tag of the resulting image. By default it's latest. fromImage is the repository tarball containing the base image. It must be a valid Docker image, such as exported by docker save. By default it's null, which can be seen as equivalent to FROM scratch of a Dockerfile. fromImageName can be used to further specify the base image within the repository, in case it contains multiple images. By default it's null, in which case buildImage will peek the first image available in the repository. fromImageTag can be used to further specify the tag of the base image within the repository, in case an image contains multiple tags. By default it's null, in which case buildImage will peek the first tag available for the base image. contents is a derivation that will be copied in the new layer of the resulting image. This can be similarly seen as ADD contents/ / in a Dockerfile. By default it's null. runAsRoot is a bash script that will run as root in an environment that overlays the existing layers of the base image with the new resulting layer, including the previously copied contents derivation. This can be similarly seen as RUN ... in a Dockerfile. Using this parameter requires the kvm device to be available. config is used to specify the configuration of the containers that will be started off the built image in Docker. The available options are listed in the Docker Image Specification v1.0.0 . After the new layer has been created, its closure (to which contents, config and runAsRoot contribute) will be copied in the layer itself. Only new dependencies that are not already in the existing layers will be copied. At the end of the process, only one new single layer will be produced and added to the resulting image. The resulting repository will only list the single image image/tag. In the case of it would be redis/latest. It is possible to inspect the arguments with which an image was built using its buildArgs attribute.
pullImage This function is analogous to the docker pull command, in that can be used to fetch a Docker image from a Docker registry. Currently only registry v1 is supported. By default Docker Hub is used to pull images. Its parameters are described in the example below: Docker pull pullImage { imageName = "debian"; imageTag = "jessie"; imageId = null; sha256 = "1bhw5hkz6chrnrih0ymjbmn69hyfriza2lr550xyvpdrnbzr4gk2"; indexUrl = "https://index.docker.io"; registryVersion = "v1"; } imageName specifies the name of the image to be downloaded, which can also include the registry namespace (e.g. library/debian). This argument is required. imageTag specifies the tag of the image to be downloaded. By default it's latest. imageId, if specified this exact image will be fetched, instead of imageName/imageTag. However, the resulting repository will still be named imageName/imageTag. By default it's null. sha256 is the checksum of the whole fetched image. This argument is required. The checksum is computed on the unpacked directory, not on the final tarball. In the above example the default values are shown for the variables indexUrl and registryVersion. Hence by default the Docker.io registry is used to pull the images.
exportImage This function is analogous to the docker export command, in that can used to flatten a Docker image that contains multiple layers. It is in fact the result of the merge of all the layers of the image. As such, the result is suitable for being imported in Docker with docker import. Using this function requires the kvm device to be available. The parameters of exportImage are the following: Docker export exportImage { fromImage = someLayeredImage; fromImageName = null; fromImageTag = null; name = someLayeredImage.name; } The parameters relative to the base image have the same synopsis as described in , except that fromImage is the only required argument in this case. The name argument is the name of the derivation output, which defaults to fromImage.name.
shadowSetup This constant string is a helper for setting up the base files for managing users and groups, only if such files don't exist already. It is suitable for being used in a runAsRoot script for cases like in the example below: Shadow base files buildImage { name = "shadow-basic"; runAsRoot = '' #!${stdenv.shell} ${shadowSetup} groupadd -r redis useradd -r -g redis redis mkdir /data chown redis:redis /data ''; } Creating base files like /etc/passwd or /etc/login.defs are necessary for shadow-utils to manipulate users and groups.