diff options
Diffstat (limited to 'nixpkgs/nixos/modules/installer/tools/nixos-rebuild.sh')
-rw-r--r-- | nixpkgs/nixos/modules/installer/tools/nixos-rebuild.sh | 404 |
1 files changed, 404 insertions, 0 deletions
diff --git a/nixpkgs/nixos/modules/installer/tools/nixos-rebuild.sh b/nixpkgs/nixos/modules/installer/tools/nixos-rebuild.sh new file mode 100644 index 000000000000..6a08c9b4c6c6 --- /dev/null +++ b/nixpkgs/nixos/modules/installer/tools/nixos-rebuild.sh @@ -0,0 +1,404 @@ +#! @shell@ + +if [ -x "@shell@" ]; then export SHELL="@shell@"; fi; + +set -e + +showSyntax() { + exec man nixos-rebuild + exit 1 +} + + +# Parse the command line. +origArgs=("$@") +extraBuildFlags=() +action= +buildNix=1 +fast= +rollback= +upgrade= +repair= +profile=/nix/var/nix/profiles/system +buildHost= +targetHost= + +while [ "$#" -gt 0 ]; do + i="$1"; shift 1 + case "$i" in + --help) + showSyntax + ;; + switch|boot|test|build|edit|dry-build|dry-run|dry-activate|build-vm|build-vm-with-bootloader) + if [ "$i" = dry-run ]; then i=dry-build; fi + action="$i" + ;; + --install-grub) + echo "$0: --install-grub deprecated, use --install-bootloader instead" >&2 + export NIXOS_INSTALL_BOOTLOADER=1 + ;; + --install-bootloader) + export NIXOS_INSTALL_BOOTLOADER=1 + ;; + --no-build-nix) + buildNix= + ;; + --rollback) + rollback=1 + ;; + --upgrade) + upgrade=1 + ;; + --repair) + repair=1 + extraBuildFlags+=("$i") + ;; + --max-jobs|-j|--cores|-I|--builders) + j="$1"; shift 1 + extraBuildFlags+=("$i" "$j") + ;; + --show-trace|--keep-failed|-K|--keep-going|-k|--verbose|-v|-vv|-vvv|-vvvv|-vvvvv|--fallback|--repair|--no-build-output|-Q|-j*) + extraBuildFlags+=("$i") + ;; + --option) + j="$1"; shift 1 + k="$1"; shift 1 + extraBuildFlags+=("$i" "$j" "$k") + ;; + --fast) + buildNix= + fast=1 + extraBuildFlags+=(--show-trace) + ;; + --profile-name|-p) + if [ -z "$1" ]; then + echo "$0: ‘--profile-name’ requires an argument" + exit 1 + fi + if [ "$1" != system ]; then + profile="/nix/var/nix/profiles/system-profiles/$1" + mkdir -p -m 0755 "$(dirname "$profile")" + fi + shift 1 + ;; + --build-host|h) + buildHost="$1" + shift 1 + ;; + --target-host|t) + targetHost="$1" + shift 1 + ;; + *) + echo "$0: unknown option \`$i'" + exit 1 + ;; + esac +done + + +if [ -z "$buildHost" -a -n "$targetHost" ]; then + buildHost="$targetHost" +fi +if [ "$targetHost" = localhost ]; then + targetHost= +fi +if [ "$buildHost" = localhost ]; then + buildHost= +fi + +buildHostCmd() { + if [ -z "$buildHost" ]; then + "$@" + elif [ -n "$remoteNix" ]; then + ssh $SSHOPTS "$buildHost" PATH="$remoteNix:$PATH" "$@" + else + ssh $SSHOPTS "$buildHost" "$@" + fi +} + +targetHostCmd() { + if [ -z "$targetHost" ]; then + "$@" + else + ssh $SSHOPTS "$targetHost" "$@" + fi +} + +copyToTarget() { + if ! [ "$targetHost" = "$buildHost" ]; then + if [ -z "$targetHost" ]; then + NIX_SSHOPTS=$SSHOPTS nix-copy-closure --from "$buildHost" "$1" + elif [ -z "$buildHost" ]; then + NIX_SSHOPTS=$SSHOPTS nix-copy-closure --to "$targetHost" "$1" + else + buildHostCmd nix-copy-closure --to "$targetHost" "$1" + fi + fi +} + +nixBuild() { + if [ -z "$buildHost" ]; then + nix-build "$@" + else + local instArgs=() + local buildArgs=() + + while [ "$#" -gt 0 ]; do + local i="$1"; shift 1 + case "$i" in + -o) + local out="$1"; shift 1 + buildArgs+=("--add-root" "$out" "--indirect") + ;; + -A) + local j="$1"; shift 1 + instArgs+=("$i" "$j") + ;; + -I) # We don't want this in buildArgs + shift 1 + ;; + --no-out-link) # We don't want this in buildArgs + ;; + "<"*) # nix paths + instArgs+=("$i") + ;; + *) + buildArgs+=("$i") + ;; + esac + done + + local drv="$(nix-instantiate "${instArgs[@]}" "${extraBuildFlags[@]}")" + if [ -a "$drv" ]; then + NIX_SSHOPTS=$SSHOPTS nix-copy-closure --to "$buildHost" "$drv" + buildHostCmd nix-store -r "$drv" "${buildArgs[@]}" + else + echo "nix-instantiate failed" + exit 1 + fi + fi +} + + +if [ -z "$action" ]; then showSyntax; fi + +# Only run shell scripts from the Nixpkgs tree if the action is +# "switch", "boot", or "test". With other actions (such as "build"), +# the user may reasonably expect that no code from the Nixpkgs tree is +# executed, so it's safe to run nixos-rebuild against a potentially +# untrusted tree. +canRun= +if [ "$action" = switch -o "$action" = boot -o "$action" = test ]; then + canRun=1 +fi + + +# If ‘--upgrade’ is given, run ‘nix-channel --update nixos’. +if [ -n "$upgrade" -a -z "$_NIXOS_REBUILD_REEXEC" ]; then + nix-channel --update nixos + + # If there are other channels that contain a file called + # ".update-on-nixos-rebuild", update them as well. + for channelpath in /nix/var/nix/profiles/per-user/root/channels/*; do + if [ -e "$channelpath/.update-on-nixos-rebuild" ]; then + nix-channel --update "$(basename "$channelpath")" + fi + done +fi + +# Make sure that we use the Nix package we depend on, not something +# else from the PATH for nix-{env,instantiate,build}. This is +# important, because NixOS defaults the architecture of the rebuilt +# system to the architecture of the nix-* binaries used. So if on an +# amd64 system the user has an i686 Nix package in her PATH, then we +# would silently downgrade the whole system to be i686 NixOS on the +# next reboot. +if [ -z "$_NIXOS_REBUILD_REEXEC" ]; then + export PATH=@nix@/bin:$PATH +fi + +# Re-execute nixos-rebuild from the Nixpkgs tree. +if [ -z "$_NIXOS_REBUILD_REEXEC" -a -n "$canRun" -a -z "$fast" ]; then + if p=$(nix-build --no-out-link --expr 'with import <nixpkgs/nixos> {}; config.system.build.nixos-rebuild' "${extraBuildFlags[@]}"); then + export _NIXOS_REBUILD_REEXEC=1 + exec $p/bin/nixos-rebuild "${origArgs[@]}" + exit 1 + fi +fi + +# Find configuration.nix and open editor instead of building. +if [ "$action" = edit ]; then + NIXOS_CONFIG=${NIXOS_CONFIG:-$(nix-instantiate --find-file nixos-config)} + exec "${EDITOR:-nano}" "$NIXOS_CONFIG" + exit 1 +fi + + +tmpDir=$(mktemp -t -d nixos-rebuild.XXXXXX) +SSHOPTS="$NIX_SSHOPTS -o ControlMaster=auto -o ControlPath=$tmpDir/ssh-%n -o ControlPersist=60" + +cleanup() { + for ctrl in "$tmpDir"/ssh-*; do + ssh -o ControlPath="$ctrl" -O exit dummyhost 2>/dev/null || true + done + rm -rf "$tmpDir" +} +trap cleanup EXIT + + + +# If the Nix daemon is running, then use it. This allows us to use +# the latest Nix from Nixpkgs (below) for expression evaluation, while +# still using the old Nix (via the daemon) for actual store access. +# This matters if the new Nix in Nixpkgs has a schema change. It +# would upgrade the schema, which should only happen once we actually +# switch to the new configuration. +# If --repair is given, don't try to use the Nix daemon, because the +# flag can only be used directly. +if [ -z "$repair" ] && systemctl show nix-daemon.socket nix-daemon.service | grep -q ActiveState=active; then + export NIX_REMOTE=${NIX_REMOTE-daemon} +fi + + +# First build Nix, since NixOS may require a newer version than the +# current one. +if [ -n "$rollback" -o "$action" = dry-build ]; then + buildNix= +fi + +nixSystem() { + machine="$(uname -m)" + if [[ "$machine" =~ i.86 ]]; then + machine=i686 + fi + echo $machine-linux +} + +prebuiltNix() { + machine="$1" + if [ "$machine" = x86_64 ]; then + echo @nix_x86_64_linux@ + elif [[ "$machine" =~ i.86 ]]; then + echo @nix_i686_linux@ + else + echo "$0: unsupported platform" + exit 1 + fi +} + +remotePATH= + +if [ -n "$buildNix" ]; then + echo "building Nix..." >&2 + nixDrv= + if ! nixDrv="$(nix-instantiate '<nixpkgs/nixos>' --add-root $tmpDir/nix.drv --indirect -A config.nix.package.out "${extraBuildFlags[@]}")"; then + if ! nixDrv="$(nix-instantiate '<nixpkgs>' --add-root $tmpDir/nix.drv --indirect -A nix "${extraBuildFlags[@]}")"; then + if ! nixStorePath="$(nix-instantiate --eval '<nixpkgs/nixos/modules/installer/tools/nix-fallback-paths.nix>' -A $(nixSystem) | sed -e 's/^"//' -e 's/"$//')"; then + nixStorePath="$(prebuiltNix "$(uname -m)")" + fi + if ! nix-store -r $nixStorePath --add-root $tmpDir/nix --indirect \ + --option extra-binary-caches https://cache.nixos.org/; then + echo "warning: don't know how to get latest Nix" >&2 + fi + # Older version of nix-store -r don't support --add-root. + [ -e $tmpDir/nix ] || ln -sf $nixStorePath $tmpDir/nix + if [ -n "$buildHost" ]; then + remoteNixStorePath="$(prebuiltNix "$(buildHostCmd uname -m)")" + remoteNix="$remoteNixStorePath/bin" + if ! buildHostCmd nix-store -r $remoteNixStorePath \ + --option extra-binary-caches https://cache.nixos.org/ >/dev/null; then + remoteNix= + echo "warning: don't know how to get latest Nix" >&2 + fi + fi + fi + fi + if [ -a "$nixDrv" ]; then + nix-store -r "$nixDrv"'!'"out" --add-root $tmpDir/nix --indirect >/dev/null + if [ -n "$buildHost" ]; then + nix-copy-closure --to "$buildHost" "$nixDrv" + # The nix build produces multiple outputs, we add them all to the remote path + for p in $(buildHostCmd nix-store -r "$(readlink "$nixDrv")" "${buildArgs[@]}"); do + remoteNix="$remoteNix${remoteNix:+:}$p/bin" + done + fi + fi + PATH="$tmpDir/nix/bin:$PATH" +fi + + +# Update the version suffix if we're building from Git (so that +# nixos-version shows something useful). +if [ -n "$canRun" ]; then + if nixpkgs=$(nix-instantiate --find-file nixpkgs "${extraBuildFlags[@]}"); then + suffix=$($SHELL $nixpkgs/nixos/modules/installer/tools/get-version-suffix "${extraBuildFlags[@]}" || true) + if [ -n "$suffix" ]; then + echo -n "$suffix" > "$nixpkgs/.version-suffix" || true + fi + fi +fi + + +if [ "$action" = dry-build ]; then + extraBuildFlags+=(--dry-run) +fi + + +# Either upgrade the configuration in the system profile (for "switch" +# or "boot"), or just build it and create a symlink "result" in the +# current directory (for "build" and "test"). +if [ -z "$rollback" ]; then + echo "building the system configuration..." >&2 + if [ "$action" = switch -o "$action" = boot ]; then + pathToConfig="$(nixBuild '<nixpkgs/nixos>' --no-out-link -A system "${extraBuildFlags[@]}")" + copyToTarget "$pathToConfig" + targetHostCmd nix-env -p "$profile" --set "$pathToConfig" + elif [ "$action" = test -o "$action" = build -o "$action" = dry-build -o "$action" = dry-activate ]; then + pathToConfig="$(nixBuild '<nixpkgs/nixos>' -A system -k "${extraBuildFlags[@]}")" + elif [ "$action" = build-vm ]; then + pathToConfig="$(nixBuild '<nixpkgs/nixos>' -A vm -k "${extraBuildFlags[@]}")" + elif [ "$action" = build-vm-with-bootloader ]; then + pathToConfig="$(nixBuild '<nixpkgs/nixos>' -A vmWithBootLoader -k "${extraBuildFlags[@]}")" + else + showSyntax + fi + # Copy build to target host if we haven't already done it + if ! [ "$action" = switch -o "$action" = boot ]; then + copyToTarget "$pathToConfig" + fi +else # [ -n "$rollback" ] + if [ "$action" = switch -o "$action" = boot ]; then + targetHostCmd nix-env --rollback -p "$profile" + pathToConfig="$profile" + elif [ "$action" = test -o "$action" = build ]; then + systemNumber=$( + targetHostCmd nix-env -p "$profile" --list-generations | + sed -n '/current/ {g; p;}; s/ *\([0-9]*\).*/\1/; h' + ) + pathToConfig="$profile"-${systemNumber}-link + if [ -z "$targetHost" ]; then + ln -sT "$pathToConfig" ./result + fi + else + showSyntax + fi +fi + + +# If we're not just building, then make the new configuration the boot +# default and/or activate it now. +if [ "$action" = switch -o "$action" = boot -o "$action" = test -o "$action" = dry-activate ]; then + if ! targetHostCmd $pathToConfig/bin/switch-to-configuration "$action"; then + echo "warning: error(s) occurred while switching to the new configuration" >&2 + exit 1 + fi +fi + + +if [ "$action" = build-vm ]; then + cat >&2 <<EOF + +Done. The virtual machine can be started by running $(echo $pathToConfig/bin/run-*-vm) +EOF +fi |