diff options
Diffstat (limited to 'nixos/modules/system/activation/switch-to-configuration.pl')
-rw-r--r-- | nixos/modules/system/activation/switch-to-configuration.pl | 362 |
1 files changed, 362 insertions, 0 deletions
diff --git a/nixos/modules/system/activation/switch-to-configuration.pl b/nixos/modules/system/activation/switch-to-configuration.pl new file mode 100644 index 000000000000..33ae3aef9fca --- /dev/null +++ b/nixos/modules/system/activation/switch-to-configuration.pl @@ -0,0 +1,362 @@ +#! @perl@ + +use strict; +use warnings; +use File::Basename; +use File::Slurp; +use Sys::Syslog qw(:standard :macros); +use Cwd 'abs_path'; + +my $out = "@out@"; + +my $startListFile = "/run/systemd/start-list"; +my $restartListFile = "/run/systemd/restart-list"; +my $reloadListFile = "/run/systemd/reload-list"; + +my $action = shift @ARGV; + +if (!defined $action || ($action ne "switch" && $action ne "boot" && $action ne "test")) { + print STDERR <<EOF; +Usage: $0 [switch|boot|test] + +switch: make the configuration the boot default and activate now +boot: make the configuration the boot default +test: activate the configuration, but don\'t make it the boot default +EOF + exit 1; +} + +die "This is not a NixOS installation (/etc/NIXOS is missing)!\n" unless -f "/etc/NIXOS"; + +openlog("nixos", "", LOG_USER); + +# Install or update the bootloader. +if ($action eq "switch" || $action eq "boot") { + system("@installBootLoader@ $out") == 0 or exit 1; +} + +# Just in case the new configuration hangs the system, do a sync now. +system("@coreutils@/bin/sync") unless ($ENV{"NIXOS_NO_SYNC"} // "") eq "1"; + +exit 0 if $action eq "boot"; + +# Check if we can activate the new configuration. +my $oldVersion = read_file("/run/current-system/init-interface-version", err_mode => 'quiet') // ""; +my $newVersion = read_file("$out/init-interface-version"); + +if ($newVersion ne $oldVersion) { + print STDERR <<EOF; +Warning: the new NixOS configuration has an ‘init’ that is +incompatible with the current configuration. The new configuration +won\'t take effect until you reboot the system. +EOF + exit 100; +} + +syslog(LOG_NOTICE, "switching to system configuration $out"); + +# Ignore SIGHUP so that we're not killed if we're running on (say) +# virtual console 1 and we restart the "tty1" unit. +$SIG{PIPE} = "IGNORE"; + +sub getActiveUnits { + # FIXME: use D-Bus or whatever to query this, since parsing the + # output of list-units is likely to break. + my $lines = `@systemd@/bin/systemctl list-units --full`; + my $res = {}; + foreach my $line (split '\n', $lines) { + chomp $line; + last if $line eq ""; + $line =~ /^(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s/ or next; + next if $1 eq "UNIT"; + $res->{$1} = { load => $2, state => $3, substate => $4 }; + } + return $res; +} + +sub parseFstab { + my ($filename) = @_; + my ($fss, $swaps); + foreach my $line (read_file($filename, err_mode => 'quiet')) { + chomp $line; + $line =~ s/^\s*#.*//; + next if $line =~ /^\s*$/; + my @xs = split / /, $line; + if ($xs[2] eq "swap") { + $swaps->{$xs[0]} = { options => $xs[3] // "" }; + } else { + $fss->{$xs[1]} = { device => $xs[0], fsType => $xs[2], options => $xs[3] // "" }; + } + } + return ($fss, $swaps); +} + +sub parseUnit { + my ($filename) = @_; + my $info = {}; + foreach my $line (read_file($filename)) { + # FIXME: not quite correct. + $line =~ /^([^=]+)=(.*)$/ or next; + $info->{$1} = $2; + } + return $info; +} + +sub boolIsTrue { + my ($s) = @_; + return $s eq "yes" || $s eq "true"; +} + +# Stop all services that no longer exist or have changed in the new +# configuration. +my (@unitsToStop, @unitsToSkip); +my $activePrev = getActiveUnits; +while (my ($unit, $state) = each %{$activePrev}) { + my $baseUnit = $unit; + + # Recognise template instances. + $baseUnit = "$1\@.$2" if $unit =~ /^(.*)@[^\.]*\.(.*)$/; + my $prevUnitFile = "/etc/systemd/system/$baseUnit"; + my $newUnitFile = "$out/etc/systemd/system/$baseUnit"; + + my $baseName = $baseUnit; + $baseName =~ s/\.[a-z]*$//; + + if (-e $prevUnitFile && ($state->{state} eq "active" || $state->{state} eq "activating")) { + if (! -e $newUnitFile) { + push @unitsToStop, $unit; + } + + elsif ($unit =~ /\.target$/) { + my $unitInfo = parseUnit($newUnitFile); + + # Cause all active target units to be restarted below. + # This should start most changed units we stop here as + # well as any new dependencies (including new mounts and + # swap devices). FIXME: the suspend target is sometimes + # active after the system has resumed, which probably + # should not be the case. Just ignore it. + if ($unit ne "suspend.target" && $unit ne "hibernate.target" && $unit ne "hybrid-sleep.target") { + unless (boolIsTrue($unitInfo->{'RefuseManualStart'} // "no")) { + write_file($startListFile, { append => 1 }, "$unit\n"); + } + } + + # Stop targets that have X-StopOnReconfiguration set. + # This is necessary to respect dependency orderings + # involving targets: if unit X starts after target Y and + # target Y starts after unit Z, then if X and Z have both + # changed, then X should be restarted after Z. However, + # if target Y is in the "active" state, X and Z will be + # restarted at the same time because X's dependency on Y + # is already satisfied. Thus, we need to stop Y first. + # Stopping a target generally has no effect on other units + # (unless there is a PartOf dependency), so this is just a + # bookkeeping thing to get systemd to do the right thing. + if (boolIsTrue($unitInfo->{'X-StopOnReconfiguration'} // "no")) { + push @unitsToStop, $unit; + } + } + + elsif (abs_path($prevUnitFile) ne abs_path($newUnitFile)) { + if ($unit eq "sysinit.target" || $unit eq "basic.target" || $unit eq "multi-user.target" || $unit eq "graphical.target") { + # Do nothing. These cannot be restarted directly. + } elsif ($unit =~ /\.mount$/) { + # Reload the changed mount unit to force a remount. + write_file($reloadListFile, { append => 1 }, "$unit\n"); + } elsif ($unit =~ /\.socket$/ || $unit =~ /\.path$/) { + # FIXME: do something? + } else { + my $unitInfo = parseUnit($newUnitFile); + if (!boolIsTrue($unitInfo->{'X-RestartIfChanged'} // "yes")) { + push @unitsToSkip, $unit; + } else { + # If this unit is socket-activated, then stop the + # socket unit(s) as well, and restart the + # socket(s) instead of the service. + my $socketActivated = 0; + if ($unit =~ /\.service$/) { + my @sockets = split / /, ($unitInfo->{Sockets} // ""); + if (scalar @sockets == 0) { + @sockets = ("$baseName.socket"); + } + foreach my $socket (@sockets) { + if (defined $activePrev->{$socket}) { + push @unitsToStop, $socket; + write_file($startListFile, { append => 1 }, "$socket\n"); + $socketActivated = 1; + } + } + } + + if (!boolIsTrue($unitInfo->{'X-StopIfChanged'} // "yes")) { + + # This unit should be restarted instead of + # stopped and started. + write_file($restartListFile, { append => 1 }, "$unit\n"); + + } else { + + # If the unit is not socket-activated, record + # that this unit needs to be started below. + # We write this to a file to ensure that the + # service gets restarted if we're interrupted. + if (!$socketActivated) { + write_file($startListFile, { append => 1 }, "$unit\n"); + } + + push @unitsToStop, $unit; + + } + } + } + } + } +} + +sub pathToUnitName { + my ($path) = @_; + die unless substr($path, 0, 1) eq "/"; + return "-" if $path eq "/"; + $path = substr($path, 1); + $path =~ s/\//-/g; + # FIXME: handle - and unprintable characters. + return $path; +} + +sub unique { + my %seen; + my @res; + foreach my $name (@_) { + next if $seen{$name}; + $seen{$name} = 1; + push @res, $name; + } + return @res; +} + +# Compare the previous and new fstab to figure out which filesystems +# need a remount or need to be unmounted. New filesystems are mounted +# automatically by starting local-fs.target. FIXME: might be nicer if +# we generated units for all mounts; then we could unify this with the +# unit checking code above. +my ($prevFss, $prevSwaps) = parseFstab "/etc/fstab"; +my ($newFss, $newSwaps) = parseFstab "$out/etc/fstab"; +foreach my $mountPoint (keys %$prevFss) { + my $prev = $prevFss->{$mountPoint}; + my $new = $newFss->{$mountPoint}; + my $unit = pathToUnitName($mountPoint) . ".mount"; + if (!defined $new) { + # Filesystem entry disappeared, so unmount it. + push @unitsToStop, $unit; + } elsif ($prev->{fsType} ne $new->{fsType} || $prev->{device} ne $new->{device}) { + # Filesystem type or device changed, so unmount and mount it. + write_file($startListFile, { append => 1 }, "$unit\n"); + push @unitsToStop, $unit; + } elsif ($prev->{options} ne $new->{options}) { + # Mount options changes, so remount it. + write_file($reloadListFile, { append => 1 }, "$unit\n"); + } +} + +# Also handles swap devices. +foreach my $device (keys %$prevSwaps) { + my $prev = $prevSwaps->{$device}; + my $new = $newSwaps->{$device}; + if (!defined $new) { + # Swap entry disappeared, so turn it off. Can't use + # "systemctl stop" here because systemd has lots of alias + # units that prevent a stop from actually calling + # "swapoff". + print STDERR "stopping swap device: $device\n"; + system("@utillinux@/sbin/swapoff", $device); + } + # FIXME: update swap options (i.e. its priority). +} + +if (scalar @unitsToStop > 0) { + @unitsToStop = unique(@unitsToStop); + print STDERR "stopping the following units: ", join(", ", sort(@unitsToStop)), "\n"; + system("@systemd@/bin/systemctl", "stop", "--", @unitsToStop); # FIXME: ignore errors? +} + +print STDERR "NOT restarting the following units: ", join(", ", sort(@unitsToSkip)), "\n" + if scalar @unitsToSkip > 0; + +# Activate the new configuration (i.e., update /etc, make accounts, +# and so on). +my $res = 0; +print STDERR "activating the configuration...\n"; +system("$out/activate", "$out") == 0 or $res = 2; + +# Restart systemd if necessary. +if (abs_path("/proc/1/exe") ne abs_path("@systemd@/lib/systemd/systemd")) { + print STDERR "restarting systemd...\n"; + system("@systemd@/bin/systemctl", "daemon-reexec") == 0 or $res = 2; +} + +# Forget about previously failed services. +system("@systemd@/bin/systemctl", "reset-failed"); + +# Make systemd reload its units. +system("@systemd@/bin/systemctl", "daemon-reload") == 0 or $res = 3; + +# Restart changed services (those that have to be restarted rather +# than stopped and started). +my @restart = unique(split('\n', read_file($restartListFile, err_mode => 'quiet') // "")); +if (scalar @restart > 0) { + print STDERR "restarting the following units: ", join(", ", sort(@restart)), "\n"; + system("@systemd@/bin/systemctl", "restart", "--", @restart) == 0 or $res = 4; + unlink($restartListFile); +} + +# Start all active targets, as well as changed units we stopped above. +# The latter is necessary because some may not be dependencies of the +# targets (i.e., they were manually started). FIXME: detect units +# that are symlinks to other units. We shouldn't start both at the +# same time because we'll get a "Failed to add path to set" error from +# systemd. +my @start = unique("default.target", "timers.target", split('\n', read_file($startListFile, err_mode => 'quiet') // "")); +print STDERR "starting the following units: ", join(", ", sort(@start)), "\n"; +system("@systemd@/bin/systemctl", "start", "--", @start) == 0 or $res = 4; +unlink($startListFile); + +# Reload units that need it. This includes remounting changed mount +# units. +my @reload = unique(split '\n', read_file($reloadListFile, err_mode => 'quiet') // ""); +if (scalar @reload > 0) { + print STDERR "reloading the following units: ", join(", ", sort(@reload)), "\n"; + system("@systemd@/bin/systemctl", "reload", "--", @reload) == 0 or $res = 4; + unlink($reloadListFile); +} + +# Signal dbus to reload its configuration. +system("@systemd@/bin/systemctl", "reload", "dbus.service"); + +# Print failed and new units. +my (@failed, @new, @restarting); +my $activeNew = getActiveUnits; +while (my ($unit, $state) = each %{$activeNew}) { + push @failed, $unit if $state->{state} eq "failed" || $state->{substate} eq "auto-restart"; + push @new, $unit if $state->{state} ne "failed" && !defined $activePrev->{$unit}; +} + +print STDERR "the following new units were started: ", join(", ", sort(@new)), "\n" + if scalar @new > 0; + +if (scalar @failed > 0) { + print STDERR "warning: the following units failed: ", join(", ", sort(@failed)), "\n"; + foreach my $unit (@failed) { + print STDERR "\n"; + system("COLUMNS=1000 @systemd@/bin/systemctl status --no-pager '$unit' >&2"); + } + $res = 4; +} + +if ($res == 0) { + syslog(LOG_NOTICE, "finished switching to system configuration $out"); +} else { + syslog(LOG_ERR, "switching to system configuration $out failed (status $res)"); +} + +exit $res; |